Get Glo 6GB For 2K – Works On All Device Except …

I can see  you are
already glued to your Phablet screen waiting to read what I’ll write next but I’m
going to shock you real hard with this because it’s what you least expected.
Relax and don’t be scared, you are going to enjoy the ride. Before you continue
reading, walk down the road and get a chill bottle of Yoghourt  cos it will help quench your taste while
reading the below.

Back to business, I’d wanted to write a review on the best data plan for June but Glo seems to be the best alltime for now. I know you are
all aware that glo gives 3gb for1k on their bis but I’m going to amaze you with
what I’m about to share with you.
Airtel 2in1 only gives you 2GB to last for 60days; you and I
know it won’t even last you upto 14days. This glo data subscription I’m about
to share is not a tweak but a simple common sense.
How Can I Activate Glo 6gb for 2K?
One thing I love about this is that Glo don’t roll over
unused data but when you make another subscription before the data date expire,
your unused data will be roll over starting from the date your initial data was
to expire.
I made a subscription few days ago having 1GB left of my
data to expire in 15days time (as at then), the new data was activated Making
4gb plus 30days added to the 15days meaning my active data will expire in
45days time.
This is the trick, Subscribe for Glo Bis by sending Comonth
to 777 on your bb phone, #1,000 will be charged and it will be activated for
you. Few hours later, load another 1k and sub again, it will be activated and
your new data expiration date will be extended to 60days with your 6gb intact.
To check your data balance, dial *777*0#.
Can This Work On PC, Android & iPhone?
This will only work on PC & iPhone if you tether it with
your Hotspot from bb10. But there are different procedures to make it work on
Android. I’ll share one here while the other, it  a risky adventure.
To Use Glo Bis on Android, do the following
==>Insert glo sim in a bb phone(bb must be on 3g)
==>send comonth to 777 and. wait for some mins to receive activation
message(3072mb).
==>Browse with the bis on that bb for like 3mins ( you can even download)
==>off the bb and remove the sim.
==>Insert the sim inside your android.
==>Configure your droid with blackberry.net and activate it.
==>Switch on your data connection (H won’t display yet).
==>Off your android again and remove the sim inside your bb (make sure the
APN is set to blackberry.net ).
==>Insert the sim inside bb again(make sure it’s on 3g here also and display
bb sign beside it)
browse for some mins (download if possible)
==>The return it back to your android and keep surfing.
Second Method To Use Glo Bis On Android
The second method is nothing related to the above but just
tweaking your imei will make it work flawlessly and you won’t need to worry
over  Glo bis on android again; but it’s
very risky cos it can brick your phone. If you need it at your own risk, drop a
comment below and I’ll send it to you.
Remember that it’s illegal to change your phone imei in some
countries because it can get you arrested.

Spread the love

97 thoughts on “Get Glo 6GB For 2K – Works On All Device Except …”

  1. Bro yomi, I don't know how to configure my glo sim to browse on android, I called the customer care and they were just saying rubbish please I use techno phantom A+ how do I configure it to make it browse

    Reply
  2. Pls yomi, i need help unlocking my mtn huawei e303 modem, and can you let me know of the second method, the first didn't work for me

    Reply
  3. Guys please don't drop your emails again. i'll drop it here.

    Disclaimer: Changing of IMEI is illegal in some countries,
    and i will not be held responsible for any consequences
    that befall the changer.
    Also, backup your original imei incase anything goes wrong then revert using the above procedures for changing.

    Before you begin, back up your Android phone using CWM should in case it get bricked.

    This is it. You can actually change your imei using the procedures highlighted here

    if you are using Tecno and Some MTK devices, dial *#*#3646633#*#* skip the mobileuncle app procedures and continue from the part in the website where you see "select engineering mode."
    Change the imei to that of scrap Blackberry phone that you will never put on again (2 imei numbers can't exist, the simcard won't register on any of the phones).

    Finally, remember to backup your original imei incase anything goes wrong then revert using the above procedures for changing.

    This process can brick your device. If you don't have the mind, don't risk it. I'm off for the night

    Reply
  4. De Prof! De Prof! ! De Prof!!! You are a BOMB! Thanks man. But one question is it a must that the BB phone you want to condemned much be a 3g BB?

    Reply
  5. Chief Prof,well done,Can this glo 6Gb sim work with PC when connect with mobile wifi and can it work with android when connect with mobile wifi

    Reply
  6. All the people droping their mails, you don't have to avoid spamming in your inbox. I have already dropped the second method on this comment section. Just go tru the comment again and you'll see it dir

    Reply
  7. @Wizzy, d method is already on dis comment session, just read up and u will see it dir.
    @Damilola, it's 1k for 3gb and not 1400. Text Comonth to 777 to activate it.

    Reply
  8. Let me also contribute to what prof has written. This is how you can change your imei to that of a scrap blackberry phone

    How to Change IMEI Number through Terminal Emulator of android phone-Tab
    For Single Sim Device
    Requirement:
    1.* Root Device
    2.* Terminal Emulatör Download from Play Store
    Process :
    1. Open Android Terminal Emulator
    2.Type SU then press ENTER button to get Superuser permmison
    3.After that, type this command then press ENTER buttonecho ‘AT+EGMR=1,7,”IMEI_NUMBER”‘ >/dev/pttycmd1
    or
    echo AT+EGMR=1*7*IMEI_1 >/dev/pttycmd1
    For Dual Sim Phones
    1. rooted android phone or tablet.
    2. install android terminal emulator app
    3. open android terminal emulator.
    4. Type SU then press ENTER
    5. type following command then Eneter echo ‘AT+EGMR=1,7, “IMEI_NUMBER” ‘ >/dev/pttycmd1
    6. if your phone is dual-sim, typ this command then ENTER echo ‘AT+EGMR=1,10, “IMEI_NUMBER” ‘ >/dev/pttycmd1
    7. Last step, reboot your phone/tablet and done.

    NOW GET A SCRAP BLACKBERRY IMEI AND YOU ARE GOOD TO GO. I NEED TESTIMONIES PLEASE…

    Reply
  9. Oh Boy this Glo 6gig make sense a lot. I have 6gig for browsing n downloading on my android and also N4000 to make call to any network @ .50k per min. Life is good with GLO

    Reply
    • How to Change IMEI Number through Terminal Emulator of android phone-Tab
      For Single Sim Device
      Requirement:
      1.* Root Device
      2.* Terminal Emulatör Download from Play Store
      Process :
      1. Open Android Terminal Emulator
      2.Type SU then press ENTER button to get Superuser permmison
      3.After that, type this command then press ENTER buttonecho ‘AT+EGMR=1,7,”IMEI_NUMBER”‘ >/dev/pttycmd1
      or
      echo AT+EGMR=1*7*IMEI_1 >/dev/pttycmd1
      For Dual Sim Phones
      1. rooted android phone or tablet.
      2. install android terminal emulator app
      3. open android terminal emulator.
      4. Type SU then press ENTER
      5. type following command then Eneter echo ‘AT+EGMR=1,7, “IMEI_NUMBER” ‘ >/dev/pttycmd1
      6. if your phone is dual-sim, typ this command then ENTER echo ‘AT+EGMR=1,10, “IMEI_NUMBER” ‘ >/dev/pttycmd1
      7. Last step, reboot your phone/tablet and done.

      NOW GET A SCRAP BLACKBERRY IMEI AND YOU ARE GOOD TO GO. I NEED TESTIMONIES PLEASE…

      Reply
    • try this trick just follow the steps; Here is the step by step guide on what to do…

      1. Dial *#*#info#*#* on ur phone. I.e *#*#4636#*#*
      This will bring out some hidden android menu

      2. Goto the first item: phone information

      3. Scroll down to the bottom. At the bottom u will see a setting like "toggle dns check:0.0.0.0 not allowed"

      4. Just tap the toggle dns ones to allowed I.e after u tap it ones it will become "toggle dns check: 0.0.0.0 allowed"

      Press back and exit…the edge or 3g symbol should appear immediately on ur phone, if u have already set ur access point to blackberry.net. if it doesn't immediately, just toggle airplane mode on and off. And it will appear.

      Reply
  10. 9ice job Prof… my huwaei E303 no the gree uunlock. the imei no na 867648010046413 and zte MF667 imei no 860014017766445

    Reply
  11. @Sito, the imei tweak works on Samsung bt I'vt tried it with any other bis aside of glo.

    @Innocent, Yes you have to change it for glo bis to work. Don't be scared, it all about risk.

    Reply
  12. Yomi I've subscribed and I followed the first procedure ….religiously to d last word …but the glo 3g sign will not appear on my phone ……using blackberry.net as pan.. …pls wots d solution…….

    Reply
    • Make sure Glo have activated your Blackberry bundle and set your apn to blackberry.net You can check your data bal by dialing *777*0#

      Also, try this trick just follow the steps; Here is the step by step guide on what to do…

      1. Dial *#*#info#*#* on ur phone. I.e *#*#4636#*#*
      This will bring out some hidden android menu

      2. Goto the first item: phone information

      3. Scroll down to the bottom. At the bottom u will see a setting like "toggle dns check:0.0.0.0 not allowed"

      4. Just tap the toggle dns ones to allowed I.e after u tap it ones it will become "toggle dns check: 0.0.0.0 allowed"

      Press back and exit…the edge or 3g symbol should appear immediately on ur phone, if u have already set ur access point to blackberry.net. if it doesn't immediately, just toggle airplane mode on and off. And it will appear.

      Reply
  13. @switch2chybu, check your email, it's been sen.
    This procedures are only men't for Mtk devices however, I'll try and get a reliable procedures for Samsung users.

    Reply
  14. Yomi.. Am having serious problems tethering my glo bis through blackberry desktop manager since I don't have a HOTSPOT, my Issue is that. I can't save the APN as blackberry.net, it. Keeps saying invalid APN

    Reply
  15. Sir Prof, I followed ur procedures, changing an browsing on a BlackBerry for a while, putting it be on d android. Nw my samsung s3 is having H And 2arrows beside it indicating strong signal. BT still can't browse or do anything. Plz help, dunno what's wrong. [email protected] thankz

    Reply
  16. @anonymous 24th June, data cap for weekly sub is 700mb

    @anonymous 25th June, did you set your apn to blackberry.net? If it's still didn't work, then be patent while a make a post on how to tweak your imei for Samsung Galaxy users.

    Reply
  17. Good work Brother. Please i am using samsung gt-n-7100 and gt-n-5100.
    1. i tried the ussd it didnt work
    2. i tried mtkafter rooting it says no support in engineering mode.
    3. i tried terminal . but whn i write su it says permission denied. kindly help regards

    Reply
  18. Sup yomi prof. I've been following u for long. Pls n pls dis thing is not working for S3 and I want u to help me with d dns stuff. I've tried everything possible so that d H will b out but its to no avail. Msg me pls [email protected]

    Reply

Leave a Comment