How to Unlock Spectranet & InterC Huawei MiFi Modem (E5573s-606 &E5573s-320)

I’ll make this simple to understand… Just follow me like a mermaid
until we reach where we are going. Over the years, unlocking MiFi modems has
always been a bone of contention because most network normally lock it to their
network… which in other words won’t allow you to use other network chip.

Today, I’m going to show you how to unlock Huawei 4G MiFi
with Model Number E5573s-320 and E5573s-606 MiFi modem. Spectranet and InterC Huawei
Modem
falls within this categories but I’ll urge you to check your MiFi Model
very well before you try the below;
Unlocking your Huawei 4G MiFi router with E5573s-320 &
E5573s-606
will give you room to use any 4G network sim like ntel, SMILE,
Swift InterC etc…without any form of restriction.
Note, if your don’t have the specified Model stipulated above,
just pretend like NFA and click on the next post.
Requirements
>>Huawei Mobile Partner (if you don’t have it, download it
here)
>>Latest HiLink Drivers (download it here)
>>Latest Huawei HiLink driver V5 (download it here)
>>Huawei E5573s-606 firmware version (download it here)
>>Huawei E5573s-320 firmware version (download it here)
>>Huawei code calculator (download it here)
>>Universal master code generator (download it here)
>>Make sure your Huawei MiFi Modem (Spectranet, InterC) is fully charged
Follow the Below steps to unlock your device.
Step 1: Unzip the Huawei hiLink drivers that you downloaded above and
install them on your PC. Once your installation is complete, reboot your PC so
that the drivers can be fully updated with your PC.
Step 2: Unzip and launch the universal master code generator, put
in your imei and click on generate
Step 3: Copy the flash code(to notepad) from the imei generated
which will serve as your password
Step 4: Insert an unsupported sim into your Huawei E5573s-606 or E5573s-320
router and connect it to your PC via USB cable.
Step 5: Unzip the Huawei E5573s-606 firmware you downloaded and go
to the folder where “Prod&Serv&Cust”, run the file P711S-E5-update_21.110.99.03.00.exe
Step 6: It will request for password, input the flash code you
copied to your notepad as password and hit the ok button. Wait for the installation
to finish. At this point, do not disconnect your usb cable, your PC must not
shot down or otherwise.

Step 7: Once the process has been successfully completed, extract and
launch Huawei code calculator
Step 8: Click on the read tab to generate your unlock code as will
be display on the result field ()

Step 9: Unzip and open the second Huawei E5573s-320 firmware you
downloaded earlier, run the E5573_Update_21.180.17.00.00.exe.
It will update your router firmware and drivers will be installed
accordingly. 
Step 10: Once the update is complete, go to your Huawei mobile
partner interface, settings select network settings, and pop up to insert your
unlock code will appear.
Step 11: Enter the unlock code you generated in step 8 and your
Huawei mifi router will be unlocked.
With this, you can rock any 4G network chip in your MiFi router.
Spread the love

41 thoughts on “How to Unlock Spectranet & InterC Huawei MiFi Modem (E5573s-606 &E5573s-320)

  1. Mr yomiprof please how do i reset my unlocking counter of huawei e5336 mifi back to 0. Or is there another way i could unlock it please.

  2. Prof i have done several copy and paste about how to go about my Etisalat ZTE 3g mifi modem with model number:MF83M
    IMEI:862774027200226
    Please prof help me out,i need to make it universal,i would prefer you tell me how to do it.

  3. If you are having issues, the solution is simple. Download and install Huawei Mobile Partner from here: http://download.myusbmodem.com/download.php?file=/Huawei%20Dashboards/Normal%20Setup/Mobile_Partner_23_for_windows.zip&start=1

    Then continue your unlocking from here:
    · After the process must have been completed, go extract and launch the Huawei code calculator that you downloaded above and then click on the read tab there to generate your unlock code as will be shown on the result field; take note of your generated unlock code

    · Now go back and extract the 2nd Huawei E5573s-320 firmware that you also downloaded initially and then run the firmware setup file in there; it will not ask for password again but will immediately start updating the firmware into the modem and the drivers will also be automatically installed at the process.

    · After the process is complete, go to your Huawei mobile partner interface and on the settings select network settings, and pop up to insert your unlock code will appear.

    · Finally key in the unlock code that you generated above with the Huawei code calculator to unlock your device.

Leave a Comment